|
Product Details:
|
| Material: | Modified Nitrile | Size: | 2 1/2 - 3 Inch |
|---|---|---|---|
| Processing: | Cutting | Pressure: | 15,000psi W.P. – 22,500 Psi Test-33,750 Psi Minimum Burst |
| Coupling: | Union, Flange And So On | Temperature: | -4℉ To +200℉ |
| High Light: | Nitrile Oilfield Drilling Hoses,Choke & Kill Hose 15000PSI,Modified Oilfield Drilling Hoses |
||
Oilfield Drilling Hoses Modified Nitrile API 16C Choke & Kill Hose
High Pressure Choke & Kill Hose is used in drilling and exploration work. Suitable for hydraulic fluids, such as hydraulic oil, fuel oil, lubricants, emulsion, glycol and water.Drilling hose is also used to adjust the installation mistake between drilling pipe line and stand pipe to avoid shake. To transmit high pressure oil or water based mud.
Meets the severe demands of today’s drilling methods including directional drilling, pressure pulses and elevated temperatures. Tube is designed to handle abrasive, corrosive and oil based drilling muds. The cover is designed to handle external damage from abrasion, corrosion, gouges, oil and weather.
| Recommended For: | Flexible hose between the riser and manifold or around the ball joint of offshore drilling rigs, specially designed to withstand high pressure.Meets the high demands of directional drilling and down linking with negative pressure pulses and elevated temperatures. This hose can also be used as a Motion Compensator hose for stabilization of rotary drilling and pumping equipment against vertical wave action on offshore drill platforms. The Motion Compensator hose is not recommended for phosphate ester fluids. |
| Tube: | Modified Nitrile. Black. Resists abrasion, corrosion, oil, and up to 20% H2S. |
| Reinforcement: | Multiple layers of textile fabric and steel cable, with one layer middle rubber placed between cable layers. |
| Cover: | Modified Nitrile. Black. Specially designed Ultra abrasion cover is resistant to abrasion, corrosion, cutting, gouging, oil and weather. |
| Couplings: |
Full range of couplings are available, such as hammer unions, flanges, camlock, male thread, etc.
|
| Temperature: | -4℉ to +200℉ (-20℃ to +93℃) continuous service |
| Options: | Accessories such as safety clamps, hose lift eyes and stainless steel armor are available upon request. |
Contact Person: Zoe Zou
Tel: + 8618392113679
Fax: 86-021-61925822
